Kinki Studio EX B7 Solid State Monoblock Power Amplifiers

EX-B7 FS (1).JPG
EX-B7 FS (2).JPG
P8121285.JPG
P8121288.JPG
P8121298.JPG
P8121307.JPG
P8121313.JPG
P8121319.JPG
P8121322.JPG
EX-B7 FS (1).JPG
EX-B7 FS (2).JPG
P8121285.JPG
P8121288.JPG
P8121298.JPG
P8121307.JPG
P8121313.JPG
P8121319.JPG
P8121322.JPG

Kinki Studio EX B7 Solid State Monoblock Power Amplifiers

from 3,398.00

What Can I even say ? This is one of those things we have not seen until now. An actual, Bona Fide High End Audio piece made in China. I would not be supporting the brand if it did not reach a level reserved only for European or American handbuillt pieces. I cant say enough, so I’ll shut up instead. Its a no brainer. There is nothing under $5K I can even recommend in an amp any longer, this one is it. In fact its such a low price, I recommend you take the step into a biamplified rig. 4 of these plus active crossover. I’ll put packages up soon. This is a killer way to get dialed on bi ir triamps rigs with active crossovers, so you can bypass the passives. Trust me a biamp config on a 2 or 3 way speaker even 4 way. now youre TRULY in world class area, all for under $20K

Amps are 250W @8. stable to zero, freq resp. 5HZ to 240K =/-3db

Spec from facotoryParameters


Frequency Response: 0-2.5MHz (±3dB)

THDN: <0.05% (-80db)

S/N Ratio: >110db(0.01Hz- 1 MHz)

Output Power: 250 W RMS(2-8 Ohms)

Max Instantaneous Power: 400w RMS (8 Ohms)

Max Output Voltage: 84VAC, 20A

Slew Rate: 200 V /us (Rise Time < 300ns)

AC Power: 110/240VAC, 50/60Hz (Factory configure)


Input / Output


Input Sensitivity: 1.45 V RMS

Input Impedance: 10-52kΩ

Input Connector: RCA x 1, XLR x 1

Output: Speaker Binding Post 4mm L/R Channel


Dimension & Weight


Dimension: 230W x 195H x 400D

Weight: 17KG/each

Price includes shipping direct from overseas via DHL. $100 can be saved by paying via bank wire or personal check or PP Friends. ($3300 total)

Color:
Quantity:
Add To Cart